$3 Shipping on all Domestic Orders * Free International Shipping on Orders Over $150
Skip to content

Embrite™ Marker Stake

$5.95 Regular price
Unit price

$3 Shipping on all Domestic orders

FREE International Shipping on Orders Over $150


This product has been produced using a Bambu Lab X1-Carbon Combo 3D printer. This is not a molded or machined part, and therefore may contain minor cosmetic imperfections. 

You may purchase this printed item from our website, or you may download the FREE STL file and print the item on your own 3D printer. NOTE: Please refer to the license agreement below before you download the STL file.

This Embrite marker stake has been upgraded, and is now 3D printed using PETG material for durability and increased heat resistance over the previous PLA version. It is designed to accept any color of our 1/2" diameter Embrite™ glow rods. Each Embrite™ rod is 7-1/2" long, and these stakes accept a 2-1/2" length. Therefore each rod will yield 3 equal pieces that can fit into these stakes with zero waste. The three large viewing windows provide ample glow visibility, and the 3mm (1/8") wide stake ribs are strong enough to hold up to numerous ground insertions.  

Our Embrite™ glow rods can easily be cut using a hacksaw or similar cutting tool in order to cut them to the correct length. The fit between the glow rod diameter and the stake bore can vary between a slight "snug" fit to a clearance fit, due to tolerances between the rod diameter and the 3D printed part. If you wish to ensure the glow rod will not accidentally fall out, you can simply use a drop of glue or epoxy to retain it in the stake. 

These markers are great for identifying paths in dark environments, marking tent locations at night, or just about anything you want to highlight when there is no ambient lighting available. Exposing them to sunlight during the day, they can provide hours of nighttime glow. We do recommend using the green Embrite™ color, as that provides the brightest and longest lasting glow. Please refer to our Technical Bulletin for more details about glow performance.

The stakes are printed with parameter settings that should provide adequate strength when inserting them into the ground, but we advise not to use excessive force (i.e. high hammer force) when installing them into hard ground.

What you get:

  • (1) Embrite™ Marker Stake (Embrite™ glow rod is NOT included)


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.


The Embrite™ Marker Stake comes in your choice of 2 colors, and can accommodate any color of our Embrite glow rods.

  • Case Material: High Strength PLA
  • Diameter: 21.00 mm [0.83"]
  • Heigh: 240.00 mm [9.45"]
  • Weight: 30 grams [1.06 oz]


PLEASE NOTE: we offer the print files under the condition that you understand the basics of 3D printing and how to print the models on your specific printer. This part can be printed without supports, however we will not offer advice on print settings, filament, or any related requirements.

Download the 3D model STL file HERE 


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.


TEC Accessories offers a 30 day no-questions-asked return policy on all of our products. If you are not satisfied with your purchase, for any reason, contact us to arrange a return/refund. In addition, all products carry a 90 day warranty against defects in materials or workmanship. Please contact us if you have any problem with your purchase that requires attention, and we will promptly make any necessary corrections.

Shipping Times

PLEASE NOTE: Due to the current logistics delays, shipping times may take longer than expected. This is especially true for International shipments, where delivery times can take weeks longer than usual. This is beyond our control, and we ask that you please be patient with expected deliveries until shipping companies get back to a more "normal" schedule.

We make every effort to process orders within one working day, however there may be slight delays depending upon the number of orders we receive, holiday periods and available staffing resources. Typically we will process all orders within no more than 2 working days.

Shipping times (from the time the package is dropped off at the carrier) will vary depending upon the carrier, method of shipment and destination. For example USPS Domestic First Class Mail should take between 2-3 days, but we have seen instances of 5-7 days. Domestic Priority Mail should take 1-2 days, but can take anywhere from 1-4 days. Domestic Express Mail should take one day, but that is only if your processed order is delivered to the post office before the cutoff time (typically 12:00 noon). Also keep in mind that weather and travel distance can have an effect on delivery times.

International shipments have even more variables that must be considered. A package sent by USPS First Class International can take anywhere from 1-3 weeks, sometimes longer depending upon the country. International shipments have the potential of being delayed by Customs, as well as having additional taxes or fees levied on a package. These are out of our control, and we advise that you become familiar with your specific country's shipping regulations to understand the impact to your shipment.

Newsletter Sign Up

Sign up for our newsletter and we promise to offer you interesting content, exceptional discounts, and sent to your inbox only once every 3-4 weeks. And we will NEVER give your email address to anyone. Give us a chance!

Newsletter Sign Up