Embrite™ Glow Pellet
Add some excitement to your original glow fob with our proprietary Embrite™ replacement pellets, now available in your choice of five different colors! These Embrite pellets will fit any 3-Series glow fob model, and you can select either the standard green color or choose a different pellet for an alternative daylight and/or glow color. Replacement is simple; see the Installment tab above for step-by-step instructions.
When exposed to sunlight or UV light, the proprietary Embrite™ pellet will glow for hours... the longer the exposure time and the higher the light intensity, the longer and brighter it will glow. Depending upon the color, glow times can last over 12 hours! This cutting edge technology will outlast and outshine anything on the market.
|Color||Daylight Color||Glow Color||Glow Duration|
|Green||Pale Green||Green||12+ Hours|
|Orange||Bright Orange||Orange-Gold||6-8 Hours|
|Lime||Bright Green||Green||8-12 Hours|
|Lemon||Bright Yellow||Green||8-12 Hours|
Glow Fob Pellet Kit Features:
- Embrite™ pellet shines up to 12 hours when exposed to sunlight/UV light
- Fits any 3-Series glow fob models (including older models)
- Colors: Choose from 5 daylight/glow colors
- Pellet replacement is simple
- Perfect for indoor and outdoor use
What you get:
- (1) Embrite™ glow fob pellet
- (1) Neoprene washer
- (1) O-ring
Each Embrite™ glow pellet consists of a custom manufactured rod of Embrite™ glow material, and one extra o-ring and washer to fit our 3 Series glow fobs.
- Material: Proprietary Embrite™ compound
- Weight: Approximately 1.3 grams [0.01 oz.]
- Color: Choose from 5 daylight/glow colors
- Size (all dimensions approximate):
- Diameter: 1/4" [6.35 mm]
- Length: 1-1/8" [28.5 mm]
See the "Installation" tab above for glow fob replacement diagram.
- Remove O-ring from the bottom face of the glow fob
- Remove old glow pellet
- Remove old neoprene washer
- With the bottom of the glow fob facing upwards, insert new neoprene washer into the glow fob housing
- Insert new Embrite pellet
- Insert new O-ring into groove inside the housing to secure the new Embrite pellet
The process used to provide the desired glow feature is based on a charge/discharge cycle. You must first charge the Embrite™ material with light, which is then stored and slowly discharged. In order to achieve the best possible results from your glow pellet, please review the following tips regarding light exposure and charging times.
The proprietary Embrite™ glow pellet is manufactured using a "trade secret" process and the brightest glowing material available anywhere on the planet to ensure we provide the brightest glow effect possible. The pellet itself charges most effectively when exposed to the UV portion of the light spectrum. Sunlight does an excellent job as a charging source, as well as UV lights and CFL bulbs but the material will also absorb an appreciable charge when exposed to indoor room light. Increased exposure time to a light source will increase the initial brightness of the glow and extend the time the material remains glowing.
A pellet that is charged in ordinary sunlight or room light for an extended period will have a noticeable glow when the lights are turned off, and will diminish gradually over the course of several hours. Although the glow intensity will fade considerably over a long duration of time, it is not uncommon to still see a recognizable glow after 8-12 hours (depending upon color choice), especially with dark-adapted vision. This charging and discharging cycle can be performed an infinite number of times. It is important to note however, that if you view the glow material in normal room light IT WILL NOT GLOW! It must be dark in order to see the glow effect.
Check our website for other Embrite™ products including various models of glow fobs, morale patches, as well as Embrite™ rods for DIY projects.